Presentia W0/W1/W2 v2

ZPDWxV2

Motion detector for in-wall flush mounting into 55 x 55 mm frame with no button (Presentia W0 v2), one (Presentia W1 v2) or two (Presentia W2 v2) buttons with customisable backlit icons. Fitting with Tecla 55, Flat 55 family and Zennio ZS55 frames, switches and sockets. Detection area of 180º and up to 10 meters length of detection. It includes several channels to be configured for lighting switching control according to luminosity threshold or according to motion detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. Installation in standard mounting box with 55 x 55 frames of 1/2/3/4 module. Frame not included.
On-line application for designing your own Capacitive Switch.

Zennio offers various finishes to suit a wide range of decorative environments, using colour references based on international standards. This table lists the available finishes along with their corresponding reference to facilitate identification and selection.

Colours shown are based on the RAL system, an international norm widely used to define hues with precision.