Sensors - Motion

Presentia W0

KNX motion detector for flush mounted in wall.

REF: ZPDW0

Motion detector for in-wall flush mounting into 55 x 55 mm frame, with a detection area of 180º and up to 10 meters length of detection. Fitting with Tecla 55, Flat 55 family and Zennio ZS55 frames, switches and sockets. It includes several channels to be configured for lighting switching control
according to luminosity threshold or according to motion detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. Installation in standard mounting box with 55 x 55 frames of 1/2/3/4 module (white, anthracite or silver). Frame not included.

Discontinued

Warning

IMPORTANT NOTE: The production of this product, Presentia W0, has been discontinued, since it has been replaced by Presentia W0/W1/W2 v2 (Ref. ZPDW0V2/1V2/2V2), including the same and even greater functionality. However, this discontinued device counts on all the support that may be required: manuals, databases, spare parts and technical support.
Update ETS5/ETS6 with the last version to be able to import the product.

Application Program ETS

Only for ETS5/ETS6 (see Warning)